Available machinery · A-2026-15
Complete sawmill plant for roundwood processing
Complete operating sawmill plant built around two independent primary log-breakdown routes and a shared MSK downstream line. The sale scope includes the processing machines, material handling, chipper, complete cyclone extraction, compressor station and Drozdowski saw-maintenance equipment. A demonstration run can be arranged before dismantling.
Application and operation
System description
The offered asset is a complete sawmill plant rather than a single saw line. It combines log breakdown, cant and side-board processing, material transport, waste handling, dust extraction, compressed air and saw maintenance in one installed production system.
The plant is offered only as one complete package. Its machines share electrical control cabinets and a single software system that manages the entire line. Dividing the installation into separate machines would require substantial control and electrical reconfiguration, make recommissioning more difficult and reduce the value of the integrated production system.
The first primary breakdown route uses a J. Bögli AG vertical band saw with an 8 m LBL clamping carriage. It is intended for logs with diameters of 30–100 cm and can process logs up to 10 m long. The band saw produces cants and side boards, which are transferred by conveyors to the common downstream section. For longer material, the documentation specifies collection from the band saw by conveyors 15 and 16.
The second route was added in 2024 and uses a Skywood SD-460 twin-shaft circular log saw with a log turner and side-board separator. It processes logs with diameters of 12–46 cm and lengths of 2–5 m. The Skywood route and the Bögli route can operate in parallel or independently.
Both primary routes feed the MSK processing system built in 2018. MSK is not one machine: it is the shared downstream line comprising material handling, cant cross-cutting, an RMO 5 twin-shaft multi-rip saw, side-board cross-cutting, edging and sorting. The main MSK section is designed for material up to 5 m long.
The complete sale scope also includes an SG Strojírna chipper, the installed dust-extraction system with cyclone, a compressor station, a Drozdowski OSW-5A automatic circular-saw sharpener and a Drozdowski MP-800 automatic saw washer. This makes the offer suitable as a complete sawmill relocation project, subject to final confirmation of the commercial scope and dismantling terms.
Photograph
Skywood route and internal material handling
Pre-owned industrial machinery · available by arrangement
Photo gallery
Photo gallery
Open a photograph to view it at full size.
Presentation film
Complete sawmill plant — presentation
A 75-second presentation of the plant, supplemented with actual photographs of the machinery offered. The material is illustrative.
Project information
Technical overview
Further technical information, photographs and available documentation are provided to qualified parties after an initial enquiry.
- Location
- Czech Republic
- Offer scope
- Complete installed sawmill plant with production machinery, material handling and supporting utilities
- Price
- approx. 1,311,200 PLN / 300,000 EUR net · slightly negotiable
- Sale basis
- Complete package only: shared control cabinets and one software system for the entire line
- Main processing system
- MSK a.s. · built in 2018 · expanded in 2024
- Operating concept
- Two independent primary breakdown routes feeding one shared MSK downstream line; parallel operation possible
- J. Bögli vertical band saw
- Logs Ø 30–100 cm · length up to 10 m · drive wheel Ø 1,400 mm · 8 m LBL clamping carriage
- Skywood SD-460
- Year 2024 · logs Ø 12–46 cm · length 2–5 m · feed 0–25 m/min · motors 90 + 75 kW
- MSK KP 6.705X1.1930 cant cross-cut saw
- Material length 0.8–5 m · cutting height 45–215 mm · maximum width 600 mm
- MSK RMO 5 twin-shaft multi-rip
- Cutting height 215 mm · material width 600 mm · feed 4–40 m/min · motors 2 × 110 kW
- Störi Mantel UKS 850 cross-cut saw
- Maximum cutting height 200 mm · width 900 mm · 10 kW
- MSK OP 2.17X1.851 edger
- Cutting height 17–60 mm · width up to 600 mm · feed 5–35 m/min · four saws
- SG Strojírna chipper
- Type S 150×400-R1-2/45 · capacity up to 8–10 m³/h · 45 kW cutting rotor
- Dust extraction
- Complete installed extraction system with cyclone and chip collection
- Compressed air
- Compressor station included
- Saw maintenance
- Drozdowski OSW-5A automatic sharpener and MP-800 automatic washer
- Maximum MSK line length
- 5 m; longer material from the Bögli route can be collected by conveyors 15 and 16
- Workforce indication
- Approx. 8–9 people including loader / forklift operation, according to the source documentation
- Current status
- Connected; demonstration run available by prior arrangement
- Relocation
- Dismantling, loading, transport and recommissioning to be agreed separately
- To be confirmed
- Schedule, dismantling arrangements and detailed commercial terms
Dismantling and relocation can be arranged.
BarTo works with a technical company that can support dismantling and relocation of this machinery. The exact scope, availability, schedule and price are agreed separately for each project and are not included in the machinery price unless expressly confirmed.
Discuss this machinery project.
Tomasz Adamski · Industrial Machinery Broker · based in Poland, working internationally.